Availability: | |
---|---|
Quantity: | |
SLY-9000 YAG laser and Argon laser
Single port.
The following are the System Specifications for the LightLas 532 Ophthalmic Laser.
General Specification
Electrical Input: 100 to 230 Vac. 50/60 Hz Single phase
Power: 400W
Fuse rating: T3.15AH250V @ 100-230Vac (T ime Lag) Temperature Range: Transport: -10 to 70° C
Operating: 15 to 30° C Storage: -10 to 55° C
Relative Humidity Range: Operating: 30% - 85% non-condensing
Storage and Transport: Up to 95% non-
Condensing
Atmospheric pressure: Operating: 800-1060 mbar
Storage and Transport: 500-1060 mbar
Cooling System: Fan cooled and TEC's for Laser Diode and Crystal
Dimensions (Total): 130mm(H) x 370mm(W) x 330mm(D)
Weight: 13 Kg (System) 20 Kg (Packed)
Treatment Laser
Laser Type: Diode Pumped Frequency Doubled YAG
Wavelength: 532 nm
Mode of Operation: CW
Power Output: 2 W Maximum to Patients Cornea. Power from
Delivery
Panel
Units laser aperture displayed on Remote Display
Power Adjustment: Variable from 0.05 to 2.0 W
Exposure Duration: 0.01, 0.02, 0.03, 0.04, 0.05, 0.06, 0.08, 0.1, 0.15 and
0.2 to 3.0s is 0.1s increment
Repeat Interval: Selectable from 0.01 to 3.0 secs and equal to or greater
Than exposure duration in same discrete steps as duration
Doctor Safety Filter: OD4 at 532 nm
Safety Class: Class 4
Power Display accuracy: Better than +/-20% of actual
Beam Divergence: < 0.2 NA
YAG LASER Technical Data
CE Mark approved according to MDD
Compact and light-weight for portability
Excellent Quality Optics for clear image and good laser delivery
Full Slit-lamp functions including 5 step magnification changer
Longer focal length for deep set eyes
Micro processor controlled with many built in safety features
CQ-YAG Crystal Laser Q-Switch for reliability
Anterior and Posterior YAG Laser Offset of 500 Microns
Treatment Laser Type: | Nd:YAG |
Wavelength: | 1064nm |
Mode: | Fundamental |
Q-switched | |
Energy: | Continuously |
adjustable from | |
0.2 to 10 mj | |
Spot Size | 8 microns |
Burst Mode: | 1,2,3,pulses each burst. Separation between pulse is 25 µs |
Pulse Width: | 4 nano-sec ( typical ) |
Repetition Rate: | Maximum 0.4s per pulse or 2.5Hz |
YAG Laser Offset Shift: | Continuously adjustable of up to 500µm both anterior and posterior around Aiming Focal Plane. |
Focal Length: | 107mm |
Cone Angle: | 16 Degrees |
Magnification: | 5 step |
Slit-lamp | CSO SL 950 |
Aiming Beam Laser: | Dual beam 635 nm diode continuously variable intensity to 200 µW |
Electrical Power: | 100V - 240V AC, 50 / 60 Hz |
Cooling System: | Air Convection. |
Dimensions(TOTAL) | 520mm(H) X 340mm(W) X 450mm(D) |
Weight: | 21kgms |
Optional Accessories:
Ophthalmic Laser Lenses
Motorized stand and table ( C-Type or T-Type)
Beam Splitter and Observation Tube
Camera and Video Adapters
SLY-9000 YAG laser and Argon laser
Single port.
The following are the System Specifications for the LightLas 532 Ophthalmic Laser.
General Specification
Electrical Input: 100 to 230 Vac. 50/60 Hz Single phase
Power: 400W
Fuse rating: T3.15AH250V @ 100-230Vac (T ime Lag) Temperature Range: Transport: -10 to 70° C
Operating: 15 to 30° C Storage: -10 to 55° C
Relative Humidity Range: Operating: 30% - 85% non-condensing
Storage and Transport: Up to 95% non-
Condensing
Atmospheric pressure: Operating: 800-1060 mbar
Storage and Transport: 500-1060 mbar
Cooling System: Fan cooled and TEC's for Laser Diode and Crystal
Dimensions (Total): 130mm(H) x 370mm(W) x 330mm(D)
Weight: 13 Kg (System) 20 Kg (Packed)
Treatment Laser
Laser Type: Diode Pumped Frequency Doubled YAG
Wavelength: 532 nm
Mode of Operation: CW
Power Output: 2 W Maximum to Patients Cornea. Power from
Delivery
Panel
Units laser aperture displayed on Remote Display
Power Adjustment: Variable from 0.05 to 2.0 W
Exposure Duration: 0.01, 0.02, 0.03, 0.04, 0.05, 0.06, 0.08, 0.1, 0.15 and
0.2 to 3.0s is 0.1s increment
Repeat Interval: Selectable from 0.01 to 3.0 secs and equal to or greater
Than exposure duration in same discrete steps as duration
Doctor Safety Filter: OD4 at 532 nm
Safety Class: Class 4
Power Display accuracy: Better than +/-20% of actual
Beam Divergence: < 0.2 NA
YAG LASER Technical Data
CE Mark approved according to MDD
Compact and light-weight for portability
Excellent Quality Optics for clear image and good laser delivery
Full Slit-lamp functions including 5 step magnification changer
Longer focal length for deep set eyes
Micro processor controlled with many built in safety features
CQ-YAG Crystal Laser Q-Switch for reliability
Anterior and Posterior YAG Laser Offset of 500 Microns
Treatment Laser Type: | Nd:YAG |
Wavelength: | 1064nm |
Mode: | Fundamental |
Q-switched | |
Energy: | Continuously |
adjustable from | |
0.2 to 10 mj | |
Spot Size | 8 microns |
Burst Mode: | 1,2,3,pulses each burst. Separation between pulse is 25 µs |
Pulse Width: | 4 nano-sec ( typical ) |
Repetition Rate: | Maximum 0.4s per pulse or 2.5Hz |
YAG Laser Offset Shift: | Continuously adjustable of up to 500µm both anterior and posterior around Aiming Focal Plane. |
Focal Length: | 107mm |
Cone Angle: | 16 Degrees |
Magnification: | 5 step |
Slit-lamp | CSO SL 950 |
Aiming Beam Laser: | Dual beam 635 nm diode continuously variable intensity to 200 µW |
Electrical Power: | 100V - 240V AC, 50 / 60 Hz |
Cooling System: | Air Convection. |
Dimensions(TOTAL) | 520mm(H) X 340mm(W) X 450mm(D) |
Weight: | 21kgms |
Optional Accessories:
Ophthalmic Laser Lenses
Motorized stand and table ( C-Type or T-Type)
Beam Splitter and Observation Tube
Camera and Video Adapters
NO.18 South of Xiangqiao Road of Nanjing ,China
0086-13675174098
0086-25-58575880
helen@redsunoptical.com
redsunoptical
0086-13675174098